There are no problems involved in the processing of motor shafts

Time:2019-07-02 20:55:02    Hits:6

1. Motor shaft processing, its simple processing, if summarized, then why? In addition, how to install the disc on the motor shaft?


Motor shaft processing, if carried out simply, is for the lathe plus milling machine processing, that is, turning processing and so on. Therefore, it is not much in the use of equipment. The simple way to install the disc on the motor shaft is to make the inner hole of the disc larger than the diameter of the motor shaft, and then to heat the assembly.



2. How to improve the cleanliness and hardness of the sealing parts in the processing of motor shafts? In addition, what is the connection between the motor shaft and the wheel?


How to improve the cleanliness and hardness of the sealing parts in the processing of motor shafts is a very good problem. As long as grease is applied on the surface of motor shafts, the purpose can be achieved. If necessary, some proper treatment can also be carried out. And the connection of motor axle and wheel, generally speaking, will be keyway on motor axle, through which to connect with wheel.



3. Why should the surface finish of motor shaft be improved in processing?


In the process of motor shaft processing, the reason for improving its surface smoothness is: this can improve the fatigue life of motor shaft, and then improve its service life, as well as improve its aesthetic appearance. At the same time, it can also improve the hardness and corrosion resistance of processed products.



For motor shaft processing, the reason why the above questions are raised is mainly because they have not been mentioned before, so it is necessary to carry out, and the correct answers are given. So, I hope you can take them seriously and carry them out, so as to have a thorough understanding, and a comprehensive understanding, so as to avoid mistakes.

爱彩乐手机app下载